How to use Ghost Windows XP SP2 Professional English x86.rar to restore your system
Ghost Windows XP SP2 Professional English x86.rar is a compressed file that contains a disk image of Windows XP Professional with Service Pack 2 (SP2) in 32-bit (x86) architecture. This disk image was created using Norton Ghost, a software that can clone and backup hard drives. You can use this file to restore your system to a clean and stable state, or to deploy Windows XP on multiple computers with similar hardware.
To use Ghost Windows XP SP2 Professional English x86.rar, you will need the following:
A computer that supports booting from CD or USB
A blank CD or USB flash drive with at least 700 MB of free space
A software that can burn ISO files to CD or USB, such as Rufus or ImgBurn
A software that can extract RAR files, such as WinRAR or 7-Zip
The Ghost Windows XP SP2 Professional English x86.rar file, which you can download from here
Here are the steps to use Ghost Windows XP SP2 Professional English x86.rar:
Extract the Ghost Windows XP SP2 Professional English x86.rar file using WinRAR or 7-Zip. You will get a file named en_winxp_pro_with_sp2_202010.iso, which is the ISO image of the Windows XP installation CD.
Burn the en_winxp_pro_with_sp2_202010.iso file to a blank CD or USB flash drive using Rufus or ImgBurn. Make sure you choose the correct device and format options.
Insert the CD or USB flash drive into the computer that you want to restore or install Windows XP on. Restart the computer and press the appropriate key to enter the BIOS or boot menu. Select the CD or USB device as the first boot option.
The computer will boot from the CD or USB device and load the Windows XP setup screen. Press Enter to start the installation.
Follow the on-screen instructions to partition and format your hard drive. Choose NTFS as the file system and leave some unallocated space for the Ghost image.
When the installation is complete, the computer will restart and load Windows XP. Do not activate or register Windows XP yet.
Insert another CD or USB flash drive that contains the Norton Ghost software and the Ghost image file. The Ghost image file is named GHOST.GHO and it is located in a folder named GHOST inside the Ghost Windows XP SP2 Professional English x86.rar file.
Run Norton Ghost from the CD or USB device and choose Local > Disk > From Image. Browse to the GHOST.GHO file and select it.
Choose your destination hard drive and click OK. Norton Ghost will warn you that all data on the destination drive will be overwritten. Click Yes to proceed.
Norton Ghost will restore your hard drive from the Ghost image file. This may take several minutes depending on the size of your hard drive and the speed of your CD or USB device.
When the restoration is complete, click OK and exit Norton Ghost. Remove the CD or USB device and restart your computer.
Your computer will boot from your hard drive and load Windows XP with SP2. You can now activate and register Windows XP using this product key: DF6B2-HTQ4F-3VJ3Q-88TVX-VX836
Congratulations! You have successfully used Ghost Windows XP SP2 Professional English x86.rar to restore your system. aa16f39245